A cam type infusion regulator consists of a shell 1, a supporting wheel 2 and a regulating wheel 3. The shell has a structure of a U-shaped groove, two pairs of axle holes (1a, 1c) are correspondingly drilled on the upper side and the lower side, and axial lines of the two pairs of the axle holes (1a, 1c) are parallel with each other and perpendicular with each other; the supporting wheel 2 is arranged in the axle hole 1c on the lower part of the shell; the regulating wheel 3 is arranged in the axle hole 1a on the upper part of the shell; the surface 3c of the regulating wheel has a cam shape, the distance between the surface 3c of the regulating wheel and an axle center changes in an involute mode, and the curvature change of the surface 3c of the regulating wheel meets the regulating and control requirements on the infusion speed; an infusion conduit is arranged between the regulating wheel 3 and the shell 1 and the supporting wheel 2; and during use, fingers twist the regulating wheel 3, the change of the distance between a curved surface 3c of the regulating wheel and a supporting wheel 3 on the bottom of the shell extrudes or releases the conduit, and changes the sectional area of the conduit to achieve the aim of regulating and controlling the infusion speed. Compared with the prior infusion regulator, the cam type infusion regulator has the characteristics of small size, material conservation, capability of self-assembly, improvement on the efficiency, convenient use, reliable regulation and stable speed.